Pneumatic Accessories

Product Details:

We keep in our stock a wide range of Solenoid coils for all types of Pneumatic, Hydraulic, and Automation Valves.

There are different types of Coils, for different types of applications such as:

• Standard application
• Weatherproof application
• Flameproof application

Product Details:

HVLP Professional Spray Gun High volume low pressure with low air pressure saves paint and protects the environment, good design of construction. Nozzle size: 1.4 high atomization with low air pressure saves paint and protects the environment, good design of construction. Better than 75% transfer efficiency with less than 10% PSI output pressure, Alternative set up available for dealing with all today's modern two pack primers, fillers and top coats, Nozzle and needle in stainless steel to allow using with water based paint.

• Consumption CFM :12.3,
• Air consumption: 6.0-11 CFM(170-300 Ltr/Min);
• Feed Type : Gravity
• Standard Nozzle: 1.4mm,
• Air Inlet: G1/4"
• Capacity of Cup: 600ML,
• Air pressure: 3-4 Bar(45-60PSI);

Product Details:

Quick connect fittings (push fittings) are used in a wide variety of plumbing, heating, electrical and fire suppression systems.

Quick connect works by inserting the tubing into a connection mechanism that deploys fastening teeth onto the tubing surface. When opposing force is applied to the union, the teeth are forced deeper into the tubing, preventing separation of the union. Quick connect fittings offer a significant time saving benefit over traditional technologies and require little skill for their usage. There are a large variety of quick connect fittings in the market and they are found in all industries. They are employed many kilometers underwater, in drilling operations, in orbit, for docking spacecraft, and everywhere in between, for a myriad of reasons.

Product Details:

Quick Release Couplings work by inserting the tubing into a connection mechanism that deploys fastening teeth onto the tubing surface. When opposing force is applied to the union, the teeth are forced deeper into the tubing, preventing separation of the union.

Quick connect fittings offer a significant time saving benefit over traditional technologies and require little skill for their usage.

We keep full range of these couplings ranging from 1/2″ to 2″ , single check as well as double check type, and in both MS as well as SS.

Product Details:

Quick Release Couplings work by inserting the tubing into a connection mechanism that deploys fastening teeth onto the tubing surface. When opposing force is applied to the union, the teeth are forced deeper into the tubing, preventing separation of the union.

Quick connect fittings offer a significant time saving benefit over traditional technologies and require little skill for their usage.

We keep full range of these couplings ranging from 1/2″ to 2″ , single check as well as double check type, and in both MS as well as SS.

Product Details:

A Roto Seal Coupling, or Rotary Union will lock onto an input valve while rotating to meet an outlet. During this time the liquid and/or gas will flow into the rotary union from its source and will be held within the device during its movement. This liquid and/or gas will leave the union when the valve openings meet during rotation and more liquid and/or gas will flow into the union again for the next rotation. Often functioning under high pressure and constant movement a rotary union is designed to rotate around an axis. A rotary union’s design can be altered to change this or to increase the psi or rpm it needs to withstand as well as the number of valves required.

Product Details:

Claw Couplings are used as Connectors for Pneumatic Tools and Compressors and come under the size range of 1/2' to 2' BSP. Made of Malleable Iron and Cast Iron, they provide ideal and sturdy usage under rough and extreme work conditions as well.

Product Details:

Pneumatic Hose Clamps are used to tighten and hold the Pneumatic Hose pipes in their place and come under the size range of 1/2' to 6' BSP. Made of Malleable Iron, which is manufactured and passed through all quality measures and working assurances.

Product Details:

Our firm is counted amongst the eminent names in industry for trading and supplying a large range of Solenoid Connectors. These have been fabricated by using optimum grade raw materials and sophisticated technology tools that make them more durable and provide longevity. Due to their high tensile strength and accurate dimensions, these connectors are widely demanded by our huge clientele.

 

Features:

• Quality checked
• Very robust
• Excellent durability

Product Details:

Other Details:

• Attractive design
• Compact size
• Threaded nipples of L,T and Y fittings enable plastic portion to turn by 360 degree
• Full area of the inner bore of the tubing is available for flow of fluid
• Bubble tight sealing of tubes
• Suitable for both Nylon and PU tubing
• Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap
• New design Stainless steel collet
• Teflon pre coated male taper threads
• Maintenance free and long life
• The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet